 Impedance
 compute · deltafac · input · input_phase · loc · ratio · transfer · transfer_phase
Impedance

class
Impedance
For calculating input and transfer impedances at an instant of time. Usage involves first defining a location either for the current stimulus or else the voltage measuring electrode, then computing the global transfer and input impedance function at a particular frequency, then retrieving values of the complex transfer and input impedance at particular locations.
The default calculation (the only calculation prior to version 5.3) is defined by di/dv only. i.e it assumes conductances depend only locally on v and does not take into account the impedance contributions of gating state differential equations. Specifically, the cable equation, c*dv/dt = i(v), where the d2v/dx2 compartmental terms are in i, yields the linearized impedance matrix [(jwc  di/dv)v = i0 ] * exp(jwt) The di/dv terms, apart from the axial terms, are defined by the current calculation in the BREAKPOINT blocks of the membrane mechanisms.
In version 5.3 the calculation was extended to take into account effects of other gating states. The calculation is currently limited to systems that can be solved with the CVode method but can be extended to systems solvable by the DASPK method. ie. currently one cannot deal with the extracellular mechanism or LinearMechanism. It would be easy to implement the LinearMechanism extension and that would be the only way one could handle nonlocal interactions such as gap junctions. (Note: Impedance has been extended to take into account the effect of parallel gap junctions. See discussion in
Impedance.compute()
.) The extension takes into account not only di/dv but also di/ds, ds’/dv and ds’/ds contributions to the impedance where s are all the other states of the membrane mechanisms. i.e the system can be writtenc 0 * d/dt v = i(v,s) 0 1 s f(v,x)
which is formally similar to the original. E.g. the hh mechanism has a sodium channel defined by
ina = gnabar*m^3*h*(v  ena) m' = (minf  m)/mtau h' = (hinf  h)/htau
the only thing contributed (one compartment) by the default method is
(jwc + gnabar*m^3*h) * v = i0
but the full linearized method contributes a matrix of terms like
(jwc + gnabar*m^3*h) gnabar*3*m^2*h*(vena) gnabar*m^3*(vena) d((minf  m)/mtau)/dv (jw  1/mtau) d((hinf  h)/htau)/dv (jw  1/htau)
associated with the vector of states (v, m, h)
The extended full impedance calculation, as well as the effect of parallel gap junctions, is invoked with an extra argument to the
Impedance.compute()
function. One should also review theImpedance.deltafac()
method which defines the accuracy of the calculation.

Impedance.
loc
()  Syntax:
.loc(x)
 Description:
A fixed current stimulus or voltage electrode location at position 0<=x<=1 of the currently accessed section. This is needed for the transfer impedance calculation. Note that transfer impedances obey the relation
v(x)/i(loc) == v(loc)/i(x)
where loc is the fixed location and x ranges over every position of every section.With parallel gap junctions, one and only one rank can have a current stimulus location. If the current stimulus location is specified on another rank, Impedance.loc(1) should be called at least on the rank where the current stimulus location used to be.

Impedance.
compute
()  Syntax:
.compute(freq)
.compute(freq, 1)
 Description:
Transfer impedance between location specified above and any other location is computed. Also the input impedance at all locations is computed –
v(x)/i(x)
Frequency specified in Hz. All membrane conductances are computed and used in the calculation as iffcurrent()
was called. The compute call is expensive but as a rule of thumb is not as expensive asfadvance()
.Since version 5.3, when the second argument is 1, an extended impedance calculation is performed which takes into account the effect of differential gating states. ie. the linearized cy’ = f(y) system is used where y is all the membrane potentials plus all the states in KINETIC and DERIVATIVE blocks of membrane mechanisms. Currently, the system must be computable with the Cvode method, i.e.extracellular and LinearMechanism are not allowed. See
Impedance.deltafac()
Note that the extended impedance calculation may involve a singular matrix because of the negative resistance contributions of excitable channels.
If the extended impedance calculation has been chosen (second arg = 1) then parallel gap junction effects will be taken into account. But for parallel gap junctions, there are several qualifications:
One and only one rank can have a stimulus location.
Impedance.loc()
can be used with an arg of 1 to remove the stimulus location on a rank.Every rank must participate in the call to compute (because of the use of MPI collective calls to carry out the impedance calculation). Note that only the freq arg value on the rank that has a location matters. If not all ranks have the second arg value of 1, the machine will hang in an MPI collective call.
Not more than 5 types of gap junction POINT_PROCESS mechanisms can be instantiated. If any POINT_PROCESS instance participates in a gap junction (via
ParallelContext.target_var()
) then all instances of that type must participate in gap junctions.Only
Impedance.transfer()
andImpedance.transfer_phase()
can be used to access the impedance values. Ranks do not have to participate in the calls to the those two methods since no MPI collective calls are involved. AfterImpedance.compute()
is called, the transfer impedance is available at any cell location and multiple calls from a rank are allowed. Note that if the stimulus location is at location x and the transfer impedance is obtained at location x and y, the input impedance is known only at location x (equal to the transfer impedance) and the voltage ratio is known only at x and y. Note that the voltage ratio at x is trivially 1.0, and the voltage at y, given that x is voltage clamped to a 1mV sine wave with freq, is transfer(y)/transfer(x) . Unfortunately this is the opposite of the definition given forImpedance.ratio()
which voltage clamped y and recorded at x. I regret the original convention which was an artifact ofImpedance.compute()
with args (freq, 0) calculating at one time, not only all the transfer impedances, but also all the input impedances at every location. The problem with the original convention forImpedance.ratio()
, and also withImpedance.input()
, when the secondImpedance.compute()
arg is 1, is that their use necessitates a solve with a moved input stimulus location specified by their argument. This is very inconvenient in a parallel context, as that solve would require the participation of all the ranks where all the args except one would have to be 1. An error message will be generated if one attempts to use the ratio or input methods in the context of parallel gap junctions when nhost > 1.Impedance calculations with parallel gap junctions use the Jacobi iterative method to solve the linear matrix equation. This method converges linearly and the number of iterations required is proportional to the gap junction strength. Up to 500 iterations are allowed before an error message is generated. Iteration stops when no state changes more than 1e9 after an iteration. It is expected that the number of iterations will be quite modest with realistic gap junction conductances (a dozen or so).
Warning
There are many limitations to the extended linearization of the complete system. It basically handles only voltage sensitive density channels where the gating states are defined by DERIVATIVE or KINETIC blocks. Prominent limitations are:
extracellular mechanism not allowed.
LinearMechanism not allowed.
Because we are not doing the complete full df/dy calculation, there may be interactions between states that are not computed. An example is where ion concentration equations are voltage sensitive in one mechanism and then the ionic current is concentration sensitive in another mechanism. ie. the typical way NEURON deals with ionic concentration coupling to current is not handled.

Impedance.
transfer
()  Syntax:
.transfer(x)
 Description:
absolute amplitude of the transfer impedance between the position specified in the
loc(x)
call above and 0<=x<=1 of currently accessed section at the freq specified by a previous compute(freq). The value returned can be thought of as eitherv(loc)/i(x) or v(x)/i(loc)
Probably the more useful way of thinking about it is to assume a current stimulus of 1nA injected at loc and the voltage in mV recorded at x.Return value has the units of Megohms and can be thought of as the amplitude of the voltage (mV) at one location that would result from the injection of 1nA at the other.
This method works with paralel gap junctions and with any nhost.

Impedance.
transfer_phase
()  Syntax:
.transfer_phase(x)
 Description:
phase of transfer impedance. The phase is modulo 2Pi in the range Pi to +Pi so as one moves away from the loc remember that the actual phase can become less than Pi. If the amplitude is very small the phase may be inaccurate and cannot be computed at all if the amplitude is 0.
This method works with paralel gap junctions and with any nhost.

Impedance.
input
()  Syntax:
.input(x)
 Description:
absolute amplitude of
v(x)/i(x)
of the currently accessed sectionThis method does not work with parallel gap junctions when nhost > 1. But note that .input(loc) where loc was the current stimulus location, is the same as
Impedance.transfer()
with an arg the same as the current stimulus location.

Impedance.
ratio
()  Syntax:
.ratio(x)
 Description:
v(loc)/v(x)
Think of it as voltage clamping to 1mV at x at some frequency and recording the voltage at loc.This method does not work with parallel gap junctions when nhost > 1. But note that .ratio(x) where loc was the current stimulus location, can be computed using a pair of calls to
Impedance.transfer()
and a pair of calls toImpedance.transfer_phase()
with a fixed stimulus location x and an argument of loc. That is, ratio(x) =  (Yreal(loc) + iYimag(loc)) / (Yreal(x) + Yimag(x))  See the comment about the legacy convention for ratio(x) inImpedance.compute()
.

Impedance.
input_phase
()  Syntax:
.input_phase(x)
 Description:
phase of input impedance.
Note: Impedance makes heavy use of memory since four complex vectors are allocated with size equal to the total number of segments. After compute is called two of these vectors holds the input and transfer impedance for a given loc, freq, and neuron state. Because of the way results of calculations are stored it is very efficient to access amp and phase; reasonably efficient to change freq or loc, and inefficient to vary neuron state, eg, diameters. The last case implies at least the overhead of a call like
fcurrent()
.(actually the present implementation callsfcurrent()
on everycompute()
call but that could be fixed if increased performance was needed).This method does not work with parallel gap junctions when nhost > 1. But note that .input_phase(loc) where loc was the current stimulus location, is the same as
Impedance.transfer_phase()
with an arg the same as the current stimulus location.

Impedance.
deltafac
()  Syntax:
fac = imp.deltafac()
fac = imp.deltafac(fac)
 Description:
 Gets or sets and gets the factor used in computing the numerical derivatives
during calculation of the extended full impedance. Jacobian elements are
calculated via the formula
f(s+delta)  f(s))/delta
where delta is defined by fac * the state tolerance scale factor for cvode. Note that default state tolerance scale factors are 1.0 except when specifically declared in mod files or changed by callingCVode.atolscale()
. The default delta factor is 0.001 which is consistent with the factor used by the default impedance calculation. Note that the factor for the default impedance calculation cannot be changed.